Down Spout Roll Forming Machine Metal Roof Rain Drain Water Gutters
Decoiler----feeding----roll forming----cut to length----output
|1||Material width||As your regards|
|2||The effective width||As your requests|
|3||The thickness of Coil||0.2—0.8mm|
|4||Application||wall sheet and roof sheet|
|5||The overall dimensions||6800mmX1500mmX1300mm|
|6||Total weight||5 Tons|
|7||Main Power||5.5 KW|
|13||Forming steps||12 or more stations|
|14||Bracket||welded with 36 # I-steel|
|15||Material of Shafts|
45# steel with rough finished and then
|16||Diameter of the Roll||76mm|
|17||Material of Rolls|
high quality 45#steel coated with hard
|18||Processing Technology||rough processing ---refined processing--Hard Chromium Plating.|
|19||Material of Rack|
complete welded structure of A3 steel
plate 16mm thickness
|20||Transmission||Transmitted by the chain-bracket|
|21||Material of Chain||45#steel with heat treatment of HRC45-50°|
|22||Holders under chain for lubricant||By the machine|
|23||Material of cutting blade||Cr12 with quenched treatment 60-62|
|24||Cutting system||Hydraulic cutting|
|25||Voltage||380V/50HZ/3phase or 415v|
Usage:It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand. Loading
capacity:3000KG.Inner diameter: 500-508mm
Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard
plating , The polished surface and the heat treatment towards the
molds also can keep the molding plate surface smooth and not easy
to be marked when it is being stamped.
Hydraulic System AND Computer Control Cabinet
Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use
PLC: EURA(Can customize as customer require)
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment
It adopts welded steel and supported roller to transmit the
products,which is used to collect the finished products
Step 1: Tell us your requirements
Step 2: Quoataion will be sent based on your requirement. Solution
will be recommended to you as the alternative
Step 3: Negotiate and confrim each details for goods, trading terms
and so on, get agreement and sign contract.
Step 4: Advanced payment and production
Step 5: Factory Examine Goods/ rectify and reform to meet the
requirements of contract.
Step 6: Balance payment and shipping
Step 7: Handing Shipping files to help clients get goods from
transporter in time.
Step 8: Clients get goods and go into warranty time.