Good Quality Custom C Channel Multi Profile Stud And Track Roll Forming Machine
Metal stud and track roll forming machine based on different designs or customer's samples . It is a new building material, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center.It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
Parameter
| 1 | Suitable to process | Color alu-zinc steel strips |
| 2 | Roller | 12Rows plus leveling device |
| 3 | Dimensions | 5.4*1*1.5m |
| 4 | Motor Power | 3Kw |
| 5 | Pump Station Motor | 3Kw.Lichao Brand |
| 6 | Thickness of the plate | 0.3-0.8mm |
| 7 | Productivity | 10-15m/min |
| 8 | Material of the cutting blade | Cr12,Quenched treatment 58℃-60℃ |
| 9 | Diameter of the roller | Φ50mm |
| 10 | Weight | About 2600kgs |
| 11 | Main structure of the machine | Square steel frame |
| 12 | Processing precision | Within 1.0mm |
| 13 | Side panel of machine | 16mm |
| 14 | Chain Wheel and Cycle Chain | 1 Inch |
| 15 | Voltage | 380V 50Hz 3phases or as customer's need |
| 16 | Control system | PLC control (Delta) |
| 17 | Frequency system | Delta |
| 18 | Drive mode | Gear driver |
| 19 | Touch screen | Delta |
| 20 | Rolling materials | 45# forging steel with chromium plate |
| 21 | Length Tolerance | ±2mm |
Our first focus is quality improvement and customer's satisfaction,we have exported the products to Africa, South America, Russia, India, Pakistan,Southeast Asia etc. the custormers of domestic and foreign evaluate highly for our stable quality and cost effective.
Details:
Decoiler:
Usage: It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading
capacity: 5T
Inner diameter: 500-508mm
Feeding table:
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Main rollers:
Material of rollers: High grade 45# Forging Steel ,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped
PACKING & DELIVERY
A. The main body of machine with water-proof plastic, then fixed to container by 8mm diameter steel wire and angle iron.
B. Rollers and shafts are covered with anti-rust oil.
C. PLC control system and motor pump are packed with waterproof paper and plastic film.
D. Spare parts in a carton box.
E. Manual decoiler was nude packing.
F. The output-table put into a carton box.
G. If the machine is too long, we will divide it into two parts and pack them in one package with steel wire.
H. Fit for ocean shipping.
After Sales Service:
1. Warranty: 18 month, and we will provide technical support for whole life of the equipment.
2. Delivery time: Within 25 days after deposit receipt your payment
3. Guarantee period: 24months free service/ pay service all the machine life
4. Installation and training
If buyers visit our factory and check the machine, we will teach you how to install and use the machine and also train your
workers/technician face to face.
Product Tags:
|
|
Custom C Channel 1.2mm Stud And Track Roll Forming Machine Multi Profile Images
|
